VK pistol/revolver discipline in the national program of the Croatian Shooting Association
25m – LARGE CALIBER PISTOL/REVOLVER SERIAL
At official HSS competitions, the use of serially manufactured pistols and revolvers cal. 7.62 to 9.65mm (.30″ to .38″) for the 25m VK pistol and centerfire revolver standard, with some limitations.
The precise part of the preparation is 5 minutes.
Number of test shots for the precision part – 5 shots.
Number of shots for the competition – precise part of 15 shots.
Number of shots per target – 5 shots.
Shooting time for the match precision part: 3 x 5 shots in 5 minutes.
Fast preparation part 3 minutes.
Number of test shots for the fast part – 5 shots.
Number of shots for the competition fast part 15 shots.
Number of shots per target – 5 shots.
Shooting time for the match fast part: 3 x 5 x 1 shot in 3 seconds, and before each shot a 7 second break.
For the part of precision shooting, targets identical to those used for precision shooting with a pistol at 25 and 50m are used.
Inner center 25 mm (±0.2mm).
Black circle from 7 to 10 = 200 mm (±1.0mm).
Thickness of border line: 0.2 mm to 0.5 mm.
The smallest visible size of the target cardboard:
Width: 550 mm
Height: 520 mm – 550 mm
The numbers indicating the values of circles 1 to 9 are printed in the rating areas, in horizontal and vertical lines, at right angles to each other.
Circle 10 grade area is not numbered. The numbers must be approximately 10mm high, 1mm thick and must be easily readable using normal binoculars at the appropriate distance.
For the rapid shooting part, targets for the 25 m pistol rapid shooting discipline are used
Inner center 50 mm (±0.2mm).
Black circle from 5 to 10 = 500 mm (±2.0mm).
Thickness of border line: 0.5 mm to 1.0 mm.
The smallest visible size of the target cardboard:
Width: 550 mm
Height: 520 mm – 550 mm
The numbers indicating the values of circles 5 to 9 are printed in the rating areas, in vertical lines only.
Circle 10 grade area is not numbered. The numbers must be approximately 5 mm high and 0.5 mm thick.
A white horizontal aiming line replaces the circle values to the left and right of the center of the target.
Each line is 125 mm long and 5 mm wide.
